<< 点击显示目录 >> 主页  轴控开发使用手册 > ACP10/ARNC0帮助信息 > ACP10_MC运动库 > 分类的功能块 > 驱动器准备 > MC_BR_NetworkInit  > Operation of the "Command" input

The function block performs an action based on this input.

mcSTOP

Aborts base network initialization for this drive. This command is used to avoid having to wait for the timeout if the drive is present in the configuration but not connected to the network.

This does not apply to axis reference mcALL_AXES.

mcSTART

Starts or resumes the base network initialization or network initialization. All steps required to initialize the drive or drives that have not yet been completed will be performed.

mcENABLE

This command can be used to enable base network initialization if the base network initialization setting has been set to "Wait for enable" in the NC Manager configuration.

This applies only to axis reference mcALL_AXES.