The first registration mark is expected at an exact position according to the current configuration. This is primarily composed of the distance from the cut position to the sensor "Configuration.DistanceToSensor", the product length "Configuration.ProductLength" and the desired registration mark position "Configuration.RegMarkPosition".
Information:
A setup movement should be performed to line the material up with the sensor.
A window is placed around this position with "AdvancedParameters.WindowNeg" and ".WindowPos". When a valid registration mark is detected, the window is shifted with "Configuration.ProductLength".
If a valid registration mark is not detected, then the "ProductsWithoutRM " output is incremented. When this occurs, the value "0.0" is output to the "CorrectionValue" output.
If "Enable" = TRUE, the current master position sMaster at beginning is read and used to calculate the first registration mark according to the following formula:
