If correction is not performed using MC_BR_CrossCutterControl (or similar function block), but with MC_BR_Phasing (correction in the current interval) instead, for example, then the sum of the corrections that have already taken place must be accounted for manually in the "CutPosition" input value.
The "frozen" position where this step will be carried out might also have to be manually determined and specified [axis units of master].
Otherwise, "CorrectionValue" and alternative outputs will demonstrate a steadily rising value (≤ correction per interval).
In addition, the setting "AdvancedParameters.CorrectCurrentCycle" = TRUE for MC_BR_RegMarkCapture002 must also be taken into account so that "CorrectionValue" will be output during the current interval (otherwise, 1 product cycle in advance).