Cam Profile Automat的实际配置
ncSIGNAL1: 参数变更(有补偿运动) 使用 "CompensationSelector "!= +mcNO_CHANGE_COMP
ncSIGNAL2: 启动耦合或者是耦合中（参数改变无补偿运动）使用"CompensationSelector"= +mcNO_START_COMP (+mcNO_CHANGE_COMP)
ncSIGNAL3: 退出功能块(有减速补偿运动) 使用"CompensationSelector" = +mcUSE_STOP_COMP
